de-p1st-monitor/README.md

# de-p1st-monitor

## Research

See [./research](./research).

- HDD temp:
  - Modern hard drives will throttle their read and write speeds
    when the drive reaches a critical pre-set temperature
    (usually around 60°C)
  - 20-50°C (short-term)
  - 20-40°C (long-term usage)
- SSD temp:
  - Most SSDs implement thermal throttling as a safety feature
    if a drive gets too hot. As the driver approaches the 70ºC limit
    that most manufacturers set, the more likely it is that the
    drive will start to slow itself down to prevent failure.
  - 30-50°C

## Keep it simple!

Lines of code including docstrings and comments:

```shell
find ./src -name '*.py' | xargs wc -l
#=> 1625 total
```

## Configuration

See [cfg/yodaTux.ini](cfg/yodaTux.ini) for a configuration file covering all config options.

## Installation

Install dependencies on Ubuntu

```shell
sudo apt-get install python3-pip

# Ubuntu 18.04 and below
sudo apt-get install python3-setuptools
sudo apt-get install python3-wheel

sudo apt-get install python3-psutil

# Ubuntu 18.04 and below: psutil < 5.6.2
sudo apt-get install python3-dev
sudo apt-get install build-essential
# Ubuntu 20.04 and below: psutil < 5.6.2
sudo python3 -m pip install psutil --upgrade
```

Install:

- On Arch Linux

```shell
make
```

- On Ubuntu

```shell
make install-pip
```

## Usage

### Command line interface

```
usage: de-p1st-monitor [-h] [--config CONFIG] [--export]

Iterates over all config sections. For each section the current sensor data is
read and logged to a .csv file.

options:
  -h, --help            show this help message and exit
  --config CONFIG, -c CONFIG
                        Path to .ini configuration file.
  --export, -e          If `True`, export .csv files and print their paths to
                        stdout. No sensor data is logged during this.
```

### Periodic logging

Add a cron entry executing this e.g. every 3 Minutes:

```shell
de-p1st-monitor
```

## Example log files

```shell
ssh nas 'tail -n 1 /var/log/de-p1st-monitor/*'
```
```
==> /var/log/de-p1st-monitor/cpu_15min.csv <==
20230712T101202,0.1351318359375

==> /var/log/de-p1st-monitor/cpu_1min.csv <==
20230712T101201,0.2215576171875

==> /var/log/de-p1st-monitor/cpu_5min.csv <==
20230712T101201,0.155517578125

==> /var/log/de-p1st-monitor/drive_20d86155-30d4-404c-95e8-c701cfb16ca5.csv <==
20230712T101202,27

==> /var/log/de-p1st-monitor/drive_4651c3f1-e4b8-45aa-a823-df762530a307.csv <==
20230712T101202,27

==> /var/log/de-p1st-monitor/drive_68c349e8-5118-4773-9fd5-5dbad9acee4e.csv <==
20230712T101202,30

==> /var/log/de-p1st-monitor/drive_b8ef1da9-d76d-44b4-86d4-71c82c888b6f.csv <==
20230712T101202,42

==> /var/log/de-p1st-monitor/filesystem_3CBA-B4EA.csv <==
20230712T101201,0.22699999999999998

==> /var/log/de-p1st-monitor/filesystem_a454430b-dee3-4b6b-8325-f7bdb9435ed1.csv <==
20230712T101201,nan

==> /var/log/de-p1st-monitor/filesystem_b8ef1da9-d76d-44b4-86d4-71c82c888b6f.csv <==
20230712T101201,0.28300000000000003

==> /var/log/de-p1st-monitor/filesystem_c385a436-0288-486f-a2b9-c64c2db667e7.csv <==
20230712T101201,0.397

==> /var/log/de-p1st-monitor/memory.csv <==
20230712T101201,3331,7434,7966

==> /var/log/de-p1st-monitor/net_enp0s31f6.csv <==
20230712T101202,34945986870,32771833466,20230706T100247

==> /var/log/de-p1st-monitor/net_enp0s31f6.csv.exported.csv <==
20230619T203731,68129.75690607735,67623.71270718232

==> /var/log/de-p1st-monitor/sensor_script_room-temp.csv <==
20230712T101202,26.19

==> /var/log/de-p1st-monitor/swap.csv <==
20230712T101201,2375,32767

==> /var/log/de-p1st-monitor/temp_coretemp_Core 0.csv <==
20230712T101202,33.0

==> /var/log/de-p1st-monitor/temp_coretemp_Core 1.csv <==
20230712T101202,39.0

==> /var/log/de-p1st-monitor/temp_coretemp_Package id 0.csv <==
20230712T101202,39.0
```

## Plots

### Creating plots with graph-cli

1) Export and fetch data

```shell
ssh_target=rootnas
dst=~/de-p1st-monitor-"${ssh_target}"
files="${dst}".files

# Export .csv files on SSH target and save list of exported files to $files.
ssh "${ssh_target}" 'de-p1st-monitor --export' > "${files}"

rm -rf "${dst}"
mkdir -p "${dst}"

rsync --checksum --archive --progress --human-readable --delete \
  --files-from="${files}" "${ssh_target}":/ "${dst}"
mv "${dst}"/var/log/de-p1st-monitor/* "${dst}"
rm -r "${dst}"/var "${files}"

cd "${dst}"
```

2) Install (Python) `graph-cli`

```shell
python -m venv ~/de-p1st-monitor.venv
source ~/de-p1st-monitor.venv/bin/activate
pip install graph-cli
```

3) Prepare data (WIP)

```shell
qsv=/home/yoda/Downloads/qsv-0.108.0-x86_64-unknown-linux-gnu/qsv
file=foo.csv

# TODO: Divide net_* total sent bytes column by 1.000.000 to make numbers smaller
"${qsv}" headers --just-names "${file}"
"${qsv}" apply dynfmt --formatstr '{FOO} €' -c 'Total Price' "${file}"
"${qsv}" apply calcconv --formatstr '{col1} + 10' --new-column BAR "${file}"
```

3) Create plots

Create one plot for each .csv file with different resampling methods (https://pandas.pydata.org/pandas-docs/stable/reference/resampling.html#computations-descriptive-stats):

```shell
function plot(){
  for file in "${@}"; do
    graph "${file}" -x 1 --resample "${sample_duration}" --resample-action "${action}" --figsize 1600x1000 -o "${file}".resample-"${sample_duration}-${action}".png || {
      echo "Error while processing ${file}"
    }
  done
}

# MEAN
sample_duration=24H
action=mean
plot {swap,memory}.csv {temp_,cpu_,sensor_script_}*.csv

# MAX
sample_duration=24H
action=max
plot {swap,memory}.csv {temp_,drive_,net_,cpu_,filesystem_,sensor_script_}*.csv

# SUM
sample_duration=24H
action=sum
plot net_*.csv
```

4) Create more plots as you like

Some self-explaining examples:

```shell
# x and y axis by column name
graph cpu_1min.csv -x 'datetime#Date' -y 'float#LoadAverage1min' --resample 1H -o cpu_1min_resample-1H.png
# x and y axis by column number
graph cpu_1min.csv -x 1 -y 2 --resample 1H -o cpu_1min_resample-1H.png
# specify x axis; use all other axes for y
graph cpu_1min.csv -x 1 --resample 1H -o cpu_1min_resample-1H.png
# increased plot size
graph cpu_1min.csv -x 1 --resample 1H --figsize 1600x1000 -o cpu_1min_resample-1H.png
```

### Example plots

![img](images/cpu_1min.csv.resample-1H.png)
![img](images/drive_68c349e8-5118-4773-9fd5-5dbad9acee4e.csv.resample-1H.png)
![img](images/filesystem_c385a436-0288-486f-a2b9-c64c2db667e7.csv.resample-1H.png)
![img](images/memory.csv.resample-1H.png)
![img](images/net_enp0s31f6.csv.exported.csv.resample-1H.png)
![img](images/swap.csv.resample-1H.png)
![img](images/temp_coretemp_Package%20id%200.csv.resample-1H.png)