The hard limit from sqlite may be larger, but things slow down as more
tags are selected.
https://forums.ankiweb.net/t/unable-to-create-custom-test/10467
There are a number of things that could be improved here:
- we should show a live count so users are aware of the limit
- we should be filling in the parent tags when they're not explicitly
listed on a card
- we should reconsider disabling the 'tags to include' by default
It may make sense to defer these changes until we can move this screen
into Svelte/handle the processing in the backend.
Combine existing check for unparsable templates with a check for unknown
field names and a check for front sides without any field replacement.
Updating the notetype's fields now mutates the parsed templates, so the
checks can run on the final templates.
Also:
- fix issues where the Undo action in the Browse screen was not
consistent with the main window. The existing hook signature has been
changed; from a snapshot of the add-on code from a few months ago, it
was not a hook that was being used by anyone.
- change the undo shortcut in the Browse window to match the main
window. It was different because undoing a change in the editing area
could accidentally trigger an undo of an operation, but the damage is
limited now that (most) operations can be redone. If it still proves to
be a problem, perhaps we should just always swallow ctrl+z when an
editing field is focused.
- Daily limits are no longer inherited - each deck limits its own
cards, and the selected deck enforces a maximum limit.
- Fetching of review cards now uses a single query, and sorts in advance.
In collections with a large number of overdue cards and decks, this is
faster than iterating over each deck in turn.
- Include interday learning count in review count & review limit, and
allow them to be buried.
- Warn when parent review limit is lower than child deck in deck options.
- Cap the new card limit to the review limit.
- Add option to control whether new card fetching short-circuits.
Updating a deck via protobuf is now exposed on the backend, but not
currently on the frontend - I suspect we'll be better off writing
separate routines for the actions we need instead, and we get a better
undo description for free.
This is currently causing an ugly redraw in the browse screen, which
will need fixing.
Older translations will note have the $notetype variable, but that is
not an error in Fluent - it would only cause problems if we tried to
use the new string on older Anki versions.
- Filtered deck creation now happens as an atomic operation, and is
undoable.
- The logic for initial search text, normalizing searches and so on
has been pushed into the backend.
- Use protobuf to pass the filtered deck to the updated dialog, so
we don't need to deal with untyped JSON.
- Change the "revise your search?" prompt to be a simple info box -
user has access to cancel and build buttons, and doesn't need a separate
prompt. Tweak the wording so the 'show excluded' button should be more
obvious.
- Filtered decks have a time appended to them instead of a number,
primarily because it's easier to implement. No objections going back to
the old behaviour if someone wants to contribute a clean patch.
The standard de-duplication will happen if two decks are created in the
same minute with the same name.
- Tweak the default sort order, and start with two searches. The UI
will still hide the second search by default, but by starting with two,
the frontend doesn't need logic for creating the starting text.
- Search errors now have their own error type, instead of using
InvalidInput, as that was intended mainly for bad API calls. The markdown
conversion is done when the error is converted from the backend, allowing
errors to printed as a string without any special handling by the calling
code.
TODO: when building a new filtered deck, update_active() is clobbering
the undo log when the overview is refreshed
- clear_unused_tags() is now undoable, and returns the number of removed
notes
- add a new mw.query_op() helper for immutable queries
- decouple "freeze/unfreeze ui state" hooks from the "interface update
required" hook, so that the former is fired even on error, and can be
made re-entrant
- use a 'block_updates' flag in Python, instead of setUpdatesEnabled(),
as the latter has the side-effect of preventing child windows like
tooltips from appearing, and forces a full redrawn when updates are
enabled again. The new behaviour leads to the card list blanking out
when a long-running op is running, but in the future if we cache the
cell values we can just display them from the cache instead.
- we were indiscriminately saving the note with saveNow(), due to the
call to saveTags(). Changed so that it only saves when the tags field
is focused.
- drain the "on_done" queue on main before launching a new background
task, to lower the chances of something in on_done making a small query
to the DB and hanging until a long op finishes
- the duplicate check in the editor was executed after the webview loads,
leading to it hanging until the sidebar finishes loading. Run it at
set_note() time instead, so that the editor loads first.
- don't throw an error when a long-running op started with with_progress()
finishes after the window it was launched from has closed
- don't throw an error when the browser is closed before the sidebar
has finished loading
- This avoids the need for a separate screen, though we may want to
slightly fade out the display when information is stale.
- Means the browser can delay updates just like the main window does.
'card modified' covers the common case where we need to rebuild the
study queue, but is also set when changing the card flags. We want to
avoid a queue rebuild in that case, as it causes UI flicker, and may
result in a different card being shown. Note marking doesn't trigger
a queue build, but still causes flicker, and may return the user back
to the front side when they were looking at the answer.
I still think entity-based change tracking is the simplest in the
common case, but to solve the above, I've introduced an enum describing
the last operation that was taken. This currently is not trying to list
out all possible operations, and just describes the ones we want to
special-case.
Other changes:
- Fire the old 'state_did_reset' hook after an operation is performed,
so legacy code can refresh itself after an operation is performed.
- Fire the new `operation_did_execute` hook when mw.reset() is called,
so that as the UI is updated to the use the new hook, it will still
be able to refresh after legacy code calls mw.reset()
- Update the deck browser, overview and review screens to listen to
the new hook, instead of relying on the main window to call moveToState()
- Add a 'set flag' backend action, so we can distinguish it from a
normal card update.
- Drop the separate added/modified entries in the change list in
favour of a single entry per entity.
- Add typing to mw.state
- Tweak perform_op()
- Convert a few more actions to use perform_op()
Up until now, we've been forcing a new search whenever reset is called.
The primary reason was that the card list display routines did not expect
a card or note to have been removed. By updating the model to show
"(deleted)" when a card or note is missing, we no longer have to repeat
the search.
This has a few advantages:
- Searches, especially complex ones, can be slow to execute. When we
perform them after every operation like a delete, it can make Anki feel
sluggish.
- The fact that notes have been deleted becomes more obvious - some users
found it easy to miss the "deleted" pop-up in the past.
This change does not just affect deletions, as many other operations
trigger a reset as well. In the past, when using 'set due date' in the
review screen for example, it caused an ugly flicker in the browser screen,
and could be slow when the current search couldn't be quickly redone.
The disadvantage of this approach is that the displayed content may
not reflect the specified search, which has the potential to be confusing.
But if that turns out to be a problem, it could be (partly) alleviated by
displaying a refresh button next to the search bar when the search may
need to be refreshed.
Feedback welcome!
Work in progress - still to do:
- renames appear as 'Update Deck' - easiest way to solve it would
be to have a separate backend method for renames
- drag&drop of decks not yet undoable
- since the undo status is updated after the backend method ends,
the older checkpoint() calls need to be replaced with an
update_undo_status() at the end of the call - if we just remove the
checkpoint, then the menu doesn't get updated
This splits update_card() into separate undoable/non-undoable ops
like the change to notes in b4396b94abdeba3347d30025c5c0240d991006c9
It means that actions get a blanket 'Update Card' description - in the
future we'll probably want to either add specific actions to the backend,
or allow an enum or string to be passed in to describe the op.
Other changes:
- card.flush() can no longer be used to add new cards. Card creation
is only supposed to be done in response to changes in a note's fields,
and this functionality was only exposed because the card generation
hadn't been migrated to the backend at that point. As far as I'm aware,
only Arthur's "copy notes" add-on used this functionality, and that should
be an easy fix - when the new note is added, the associated cards will
be generated, and they can then be retrieved with note.cards()
- tidy ups/PEP8
- note.flush() behaves like before, as otherwise actions or add-ons
that perform bulk flushing would end up creating an undo entry for
each note
- added col.update_note() to opt in to the new behaviour
- tidy up the names of some related routines
- transact() now automatically clears card queues unless an op
opts-out (and currently only AnswerCard does). This means there's no
risk of forgetting to clear the queues in an operation, or when undoing/
redoing
- CollectionOp->UndoableOp
- clear queues when redoing "answer card", instead of clearing redo
when clearing queues
- Since we need to show this to new users until AnkiDroid is updated,
use a wording that doesn't seem so out of place to new users.
- Avoid mentioning syncing, since the user may not sync, and the
modSchema() call will allow the user to confirm anyway.
- Let the user know they can change their mind about AnkiDroid by
visiting the preferences.
- Rework V2 upgrade so that it no longer resets cards in learning,
or empties filtered decks.
- V1 users will receive a message at the top of the deck list
encouraging them to upgrade, and they can upgrade directly from that
screen.
- The setting in the preferences screen has been removed, so users
will need to use an older Anki version if they wish to switch back to
V1.
- Prevent V2 exports with scheduling from being importable into a V1
collection - the code was previously allowing this when it shouldn't
have been.
- New collections still default to v1 at the moment.
Also add helper to get map of decks and deck configs, as there were
a few places in the codebase where that was required.
