- Filtered deck creation now happens as an atomic operation, and is
undoable.
- The logic for initial search text, normalizing searches and so on
has been pushed into the backend.
- Use protobuf to pass the filtered deck to the updated dialog, so
we don't need to deal with untyped JSON.
- Change the "revise your search?" prompt to be a simple info box -
user has access to cancel and build buttons, and doesn't need a separate
prompt. Tweak the wording so the 'show excluded' button should be more
obvious.
- Filtered decks have a time appended to them instead of a number,
primarily because it's easier to implement. No objections going back to
the old behaviour if someone wants to contribute a clean patch.
The standard de-duplication will happen if two decks are created in the
same minute with the same name.
- Tweak the default sort order, and start with two searches. The UI
will still hide the second search by default, but by starting with two,
the frontend doesn't need logic for creating the starting text.
- Search errors now have their own error type, instead of using
InvalidInput, as that was intended mainly for bad API calls. The markdown
conversion is done when the error is converted from the backend, allowing
errors to printed as a string without any special handling by the calling
code.
TODO: when building a new filtered deck, update_active() is clobbering
the undo log when the overview is refreshed
Now behaves the same way as standard find&replace:
- Will match substrings
- Regexs can be used to match multiple items; we no longer split
input on spaces.
- The find&replace dialog has been updated to add tags to the field
list.
We were (ab)using the bulk update routine to do deletions, but that
code was really intended to be used for finding&replacing, where an
exact match is not a requirement.
- clear_unused_tags() is now undoable, and returns the number of removed
notes
- add a new mw.query_op() helper for immutable queries
- decouple "freeze/unfreeze ui state" hooks from the "interface update
required" hook, so that the former is fired even on error, and can be
made re-entrant
- use a 'block_updates' flag in Python, instead of setUpdatesEnabled(),
as the latter has the side-effect of preventing child windows like
tooltips from appearing, and forces a full redrawn when updates are
enabled again. The new behaviour leads to the card list blanking out
when a long-running op is running, but in the future if we cache the
cell values we can just display them from the cache instead.
- we were indiscriminately saving the note with saveNow(), due to the
call to saveTags(). Changed so that it only saves when the tags field
is focused.
- drain the "on_done" queue on main before launching a new background
task, to lower the chances of something in on_done making a small query
to the DB and hanging until a long op finishes
- the duplicate check in the editor was executed after the webview loads,
leading to it hanging until the sidebar finishes loading. Run it at
set_note() time instead, so that the editor loads first.
- don't throw an error when a long-running op started with with_progress()
finishes after the window it was launched from has closed
- don't throw an error when the browser is closed before the sidebar
has finished loading
- Introduced a new transact() method that wraps the return value
in a separate struct that describes the changes that were made.
- Changes are now gathered from the undo log, so we don't need to
guess at what was changed - eg if update_note() is called with identical
note contents, no changes are returned. Card changes will only be set
if cards were actually generated by the update_note() call, and tag
will only be set if a new tag was added.
- mw.perform_op() has been updated to expect the op to return the changes,
or a structure with the changes in it, and it will use them to fire the
change hook, instead of fetching the changes from undo_status(), so there
is no risk of race conditions.
- the various calls to mw.perform_op() have been split into separate
files like card_ops.py. Aside from making the code cleaner, this works
around a rather annoying issue with mypy. Because we run it with
no_strict_optional, mypy is happy to accept an operation that returns None,
despite the type signature saying it requires changes to be returned.
Turning no_strict_optional on for the whole codebase is not practical
at the moment, but we can enable it for individual files.
Still todo:
- The cursor keeps moving back to the start of a field when typing -
we need to ignore the refresh hook when we are the initiator.
- The busy cursor icon should probably be delayed a few hundreds ms.
- Still need to think about a nicer way of handling saveNow()
- op_made_changes(), op_affects_study_queue() might be better embedded
as properties in the object instead
Issues that need fixing:
- when the editor saves the note with perform_op(), if it isn't modified,
no new undo entry is created, and perform_op then returns the changes
made by the previous operation instead
- the approach of fetching the last action in a subsequent backend
method is unsound, as another queued operation may sneak in first before
we have a chance to query the result - it would be better if it were
returned in a single atomic action
- redrawing the current card while editing is likely to make sound
autoplay annoyingly, and it has an unpleasant redraw. We may be better off
fading it out instead
Side note: the editor cursor moves to the start of the field when the
note is updated in another window - it might be nicer to have it move
the cursor to the end instead.
'card modified' covers the common case where we need to rebuild the
study queue, but is also set when changing the card flags. We want to
avoid a queue rebuild in that case, as it causes UI flicker, and may
result in a different card being shown. Note marking doesn't trigger
a queue build, but still causes flicker, and may return the user back
to the front side when they were looking at the answer.
I still think entity-based change tracking is the simplest in the
common case, but to solve the above, I've introduced an enum describing
the last operation that was taken. This currently is not trying to list
out all possible operations, and just describes the ones we want to
special-case.
Other changes:
- Fire the old 'state_did_reset' hook after an operation is performed,
so legacy code can refresh itself after an operation is performed.
- Fire the new `operation_did_execute` hook when mw.reset() is called,
so that as the UI is updated to the use the new hook, it will still
be able to refresh after legacy code calls mw.reset()
- Update the deck browser, overview and review screens to listen to
the new hook, instead of relying on the main window to call moveToState()
- Add a 'set flag' backend action, so we can distinguish it from a
normal card update.
- Drop the separate added/modified entries in the change list in
favour of a single entry per entity.
- Add typing to mw.state
- Tweak perform_op()
- Convert a few more actions to use perform_op()
Rust requires all methods of impl Trait to be in a single file, which
means we had a giant backend/mod.rs covering all exposed methods. By
using separate service definitions for the separate areas, and updating
the code generation, we can split it into more manageable chunks -
this commit starts with the scheduling code.
In the long run, we'll probably want to split up the protobuf file into
multiple files as well.
Also dropped want_release_gil() from rsbridge, and the associated method
enum. While it allows us to skip the thread save/restore and mutex unlock/
lock, it looks to only be buying about 2.5% extra performance in the
best case (tested with timeit+format_timespan), and the majority of
the backend methods deal with I/O, and thus were already releasing the
GIL.
- moved 'default to current deck when adding' into prefs
- move some profile options into the collection config, so they're
undoable and will sync. There is (currently) no automatic migration
from the old profile settings, meaning users will need to set the
options again if they've customized them.
- tidy up preferences.py
- drop the deleteMedia option that was not exposed in the UI
The existing code was really difficult to reason about:
- The default notetype depended on the selected deck, and vice versa,
and this logic was buried in the deck and notetype choosing screens,
and models.py.
- Changes to the notetype were not passed back directly, but were fired
via a hook, which changed any screen in the app that had a notetype
selector.
It also wasn't great for performance, as the most recent deck and tags
were embedded in the notetype, which can be expensive to save and sync
for large notetypes.
To address these points:
- The current deck for a notetype, and notetype for a deck, are now
stored in separate config variables, instead of directly in the deck
or notetype. These are cheap to read and write, and we'll be able to
sync them individually in the future once config syncing is updated in
the future. I seem to recall some users not wanting the tag saving
behaviour, so I've dropped that for now, but if people end up missing
it, it would be simple to add as an extra auxiliary config variable.
- The logic for getting the starting deck and notetype has been moved
into the backend. It should be the same as the older Python code, with
one exception: when "change deck depending on notetype" is enabled in
the preferences, it will start with the current notetype ("curModel"),
instead of first trying to get a deck-specific notetype.
- ModelChooser has been duplicated into notetypechooser.py, and it
has been updated to solely be concerned with keeping track of a selected
notetype - it no longer alters global state.
This splits update_card() into separate undoable/non-undoable ops
like the change to notes in b4396b94abdeba3347d30025c5c0240d991006c9
It means that actions get a blanket 'Update Card' description - in the
future we'll probably want to either add specific actions to the backend,
or allow an enum or string to be passed in to describe the op.
Other changes:
- card.flush() can no longer be used to add new cards. Card creation
is only supposed to be done in response to changes in a note's fields,
and this functionality was only exposed because the card generation
hadn't been migrated to the backend at that point. As far as I'm aware,
only Arthur's "copy notes" add-on used this functionality, and that should
be an easy fix - when the new note is added, the associated cards will
be generated, and they can then be retrieved with note.cards()
- tidy ups/PEP8
- note.flush() behaves like before, as otherwise actions or add-ons
that perform bulk flushing would end up creating an undo entry for
each note
- added col.update_note() to opt in to the new behaviour
- tidy up the names of some related routines
- transact() now automatically clears card queues unless an op
opts-out (and currently only AnswerCard does). This means there's no
risk of forgetting to clear the queues in an operation, or when undoing/
redoing
- CollectionOp->UndoableOp
- clear queues when redoing "answer card", instead of clearing redo
when clearing queues
- use dataclasses for the review/checkpoint undo cases, instead of the
nasty ad-hoc list structure
- expose backend review undo to Python, and hook it into GUI
- redo is not currently exposed on the GUI, and the backend can only
cope with reviews done by the new scheduler at the moment
- the initial undo prototype code was bumping mtime/usn on undo, but
that was not ideal, as it was breaking the queue handling which expected
the mtime to match. The original rationale for bumping mtime/usn was
to avoid problems with syncing, but various operations like removing
a revlog can't be synced anyway - so we just need to ensure we clear the
undo queue prior to syncing
- Currently we just use 1.5x and 2x the normal preview delay; we could
change this in the future.
- Don't try to capture the current state; just use a flag to denote
exit status.
- Show (end) when exiting
This is not the way the code is intended to be used, but making it
conform to the existing API allows us to exercise the existing unit
tests and provides partial backwards compatibility.
- Leech handling is currently broken
- Fix answered_at in wrong units, and not being used
