Appears to have regressed in #2071. I'd used 'inherit' so that the default
editable styling would impose a 100% limit, but it appears that variable
interpolation prevents the parent styling from being applied.
(for upgrading users, please see the notes at the bottom)
Bazel brought a lot of nice things to the table, such as rebuilds based on
content changes instead of modification times, caching of build products,
detection of incorrect build rules via a sandbox, and so on. Rewriting the build
in Bazel was also an opportunity to improve on the Makefile-based build we had
prior, which was pretty poor: most dependencies were external or not pinned, and
the build graph was poorly defined and mostly serialized. It was not uncommon
for fresh checkouts to fail due to floating dependencies, or for things to break
when trying to switch to an older commit.
For day-to-day development, I think Bazel served us reasonably well - we could
generally switch between branches while being confident that builds would be
correct and reasonably fast, and not require full rebuilds (except on Windows,
where the lack of a sandbox and the TS rules would cause build breakages when TS
files were renamed/removed).
Bazel achieves that reliability by defining rules for each programming language
that define how source files should be turned into outputs. For the rules to
work with Bazel's sandboxing approach, they often have to reimplement or
partially bypass the standard tools that each programming language provides. The
Rust rules call Rust's compiler directly for example, instead of using Cargo,
and the Python rules extract each PyPi package into a separate folder that gets
added to sys.path.
These separate language rules allow proper declaration of inputs and outputs,
and offer some advantages such as caching of build products and fine-grained
dependency installation. But they also bring some downsides:
- The rules don't always support use-cases/platforms that the standard language
tools do, meaning they need to be patched to be used. I've had to contribute a
number of patches to the Rust, Python and JS rules to unblock various issues.
- The dependencies we use with each language sometimes make assumptions that do
not hold in Bazel, meaning they either need to be pinned or patched, or the
language rules need to be adjusted to accommodate them.
I was hopeful that after the initial setup work, things would be relatively
smooth-sailing. Unfortunately, that has not proved to be the case. Things
frequently broke when dependencies or the language rules were updated, and I
began to get frustrated at the amount of Anki development time I was instead
spending on build system upkeep. It's now about 2 years since switching to
Bazel, and I think it's time to cut losses, and switch to something else that's
a better fit.
The new build system is based on a small build tool called Ninja, and some
custom Rust code in build/. This means that to build Anki, Bazel is no longer
required, but Ninja and Rust need to be installed on your system. Python and
Node toolchains are automatically downloaded like in Bazel.
This new build system should result in faster builds in some cases:
- Because we're using cargo to build now, Rust builds are able to take advantage
of pipelining and incremental debug builds, which we didn't have with Bazel.
It's also easier to override the default linker on Linux/macOS, which can
further improve speeds.
- External Rust crates are now built with opt=1, which improves performance
of debug builds.
- Esbuild is now used to transpile TypeScript, instead of invoking the TypeScript
compiler. This results in faster builds, by deferring typechecking to test/check
time, and by allowing more work to happen in parallel.
As an example of the differences, when testing with the mold linker on Linux,
adding a new message to tags.proto (which triggers a recompile of the bulk of
the Rust and TypeScript code) results in a compile that goes from about 22s on
Bazel to about 7s in the new system. With the standard linker, it's about 9s.
Some other changes of note:
- Our Rust workspace now uses cargo-hakari to ensure all packages agree on
available features, preventing unnecessary rebuilds.
- pylib/anki is now a PEP420 implicit namespace, avoiding the need to merge
source files and generated files into a single folder for running. By telling
VSCode about the extra search path, code completion now works with generated
files without needing to symlink them into the source folder.
- qt/aqt can't use PEP420 as it's difficult to get rid of aqt/__init__.py.
Instead, the generated files are now placed in a separate _aqt package that's
added to the path.
- ts/lib is now exposed as @tslib, so the source code and generated code can be
provided under the same namespace without a merging step.
- MyPy and PyLint are now invoked once for the entire codebase.
- dprint will be used to format TypeScript/json files in the future instead of
the slower prettier (currently turned off to avoid causing conflicts). It can
automatically defer to prettier when formatting Svelte files.
- svelte-check is now used for typechecking our Svelte code, which revealed a
few typing issues that went undetected with the old system.
- The Jest unit tests now work on Windows as well.
If you're upgrading from Bazel, updated usage instructions are in docs/development.md and docs/build.md. A summary of the changes:
- please remove node_modules and .bazel
- install rustup (https://rustup.rs/)
- install rsync if not already installed (on windows, use pacman - see docs/windows.md)
- install Ninja (unzip from https://github.com/ninja-build/ninja/releases/tag/v1.11.1 and
place on your path, or from your distro/homebrew if it's 1.10+)
- update .vscode/settings.json from .vscode.dist
* Fix custom scrollbar not showing
* Move body selector out of scrollbar mixin
* Apply custom scrollbar to child elements too
* Remove some duplicate definitions
* Run prettier
* Add flag for enabling insert symbols feature
* Add symbols overlay directory
* Detect if :xy is inserted into editable
* Allow naive updating of overlay, and special handling of ':'
* First step towards better Virtual Element support
* Update floating to reference range on insert text
* Position SymbolsOverlay always on top or bottom
* Add a data-provider to emulate API
* Show correct suggestions in symbols overlay
* Rename to replacementLength
* Allow replacing via clicking in menu
* Optionally remove inline padding of Popover
* Hide Symbols overlay on blur of content editable
* Add specialKey to inputHandler and generalize how arrow movement is detected
- This way macOS users can use Ctrl-N to mean down, etc.
* Detect special key from within SymbolsOverlay
* Implement full backwards search while typing
* Allow navigating symbol menu and accepting with enter
* Add some entries to data-provider
* Satisfy eslint
* Generate symbolsTable from sources
* Use other github source, allow multiple names
In return, symbol must be unique
* Automatically scroll in symbols dropdown
* Use from npm packages rather than downloading from URL
* Remove console.log
* Remove print
* Add pointerDown event to input-handler
- so that SymbolsOverlay can reset on field click
* Make tab do the same as enter
* Make font a bit smaller but increase relative icon size
* Satisfy type requirement of handlerlist
* Revert changing default size of DropdownItems
* Remove some now unused code for bootstrap dropdowns
* Remove --medium-border variable
* Implement color palette using Sass maps
I hand-picked the gray tones, the other colors are from the Tailwind CSS v3 palette.
Significant changes:
- light theme is brighter
- dark theme is darker
- borders are softer
I also deleted some platform- and night-mode-specific code.
* Use custom colors for note view switch
* Use same placeholder color for all inputs
* Skew color palette for more dark values
by removing gray[3], which wasn't used anywhere. Slight adjustments were made to the darker tones.
* Adjust frame- window- and border colors
* Give deck browser entries --frame-bg as background color
* Define styling for QComboBox and QLineEdit globally
* Experiment with CSS filter for inline-colors
Inside darker inputs, some colors like dark blue will be hard to read, so we could try to improve text-color contrast with global adjustments depending on the theme.
* Use different map structure for _vars.scss
after @hgiesel's idea: https://github.com/ankitects/anki/pull/2016#discussion_r947087871
* Move custom QLineEdit styles out of searchbar.py
* Merge branch 'main' into color-palette
* Revert QComboBox stylesheet override
* Align gray color palette more with macOS
* Adjust light theme
* Add custom styling for Qt controls
* Use --slightly-grey-text for options tab color
* Replace gray tones with more neutral values
* Improve categorization of global colors
by renaming almost all of them and sorting them into separate maps.
* Saturate highlight-bg in light theme
* Tweak gray tones
* Adjust box-shadow of EditingArea to make fields look inset
* Add Sass functions to access color palette and semantic variables
in response to https://github.com/ankitects/anki/pull/2016#issuecomment-1220571076
* Showcase use of access functions in several locations
@hgiesel in buttons.scss I access the color palette directly. Is this what you meant by "... keep it local to the component, and possibly make it global at a later time ..."?
* Fix focus box shadow transition and remove default shadow for a cleaner look
I couldn't quite get the inset look the way I wanted, because inset box-shadows do not respect the border radius, therefore causing aliasing.
* Tweak light theme border and shadow colors
* Add functions and colors to base_lib
* Add vars_lib as dependency to base_lib and button_mixins_lib
* Improve uses of default-themed variables
* Use old --frame-bg color and use darker tone for canvas-default
* Return CSS var by default and add palette-of function for raw value
* Showcase use of palette-of function
The #{...} syntax is required only because the use cases are CSS var definitions. In other cases a simple palette-of(keyword, theme) would suffice.
* Light theme: decrease brightness of canvas-default and adjust fg-default
* Use canvas-inset variable for switch knob
* Adjust light theme
* Add back box-shadow to EditingArea
* Light theme: darken background and flatten transition
also set hue and saturation of gray-8 to 0 (like all the other grays).
* Reduce flag colors to single default value
* Tweak card/note accent colors
* Experiment with inset look for fields again
Is this too dark in night mode? It's the same color used for all other text inputs.
* Dark theme: make border-default one shade darker
* Tweak inset shadow color
* Dark theme: make border-faint darker than canvas-default
meaning two shades darker than it currently was.
* Fix PlainTextInput not expanding
* Dark theme: use less saturated flag colors
* Adjust gray tones
* Create stylesheet overrides for various Qt widgets
Including QPushButton, QComboBox, QSpinBox, QLineEdit, QListWidget, QTabWidget, QTreeWidget, QToolTip, QTableView, QScrollBar and sub-widgets.
* Make webview scrollbar look identical to Qt one
* Add blue colors for primary buttons
* Tweak disabled state of SpinBox button
* Apply styles to all platforms
mainly so people like @hgiesel can easily test the widget style overrides, but maybe you actually prefer them over the native ones, who knows :)
* Tweak webview button borders
* Add type annotations to eventFilter
* Adjust padding of QComboBox and its drop-down arrow
* Use isinstance for comparison
* Remove reimport of Any
* Revert "Merge branch 'redesign-test' into custom-qt-controls"
This reverts commit ff36297456b693a0d4b4b69f5f487ac1a01c1861, reversing
changes made to 6bb45355d143aa081d2d643933bd02ddc43206de.
* Add missing copyright header
* Left-align QTabWidget headers
* Exclude macOS from stylesheet overrides
* Fix failure to start on macOS (dae)
* Use standard macOS theme in dark mode (dae)
I believe this was originally behind a feature flag because the user
had to use a hack to get it to work
(https://forums.ankiweb.net/t/title-bar-dark-mode-fix-broken/1189),
and it did not work correctly when the system theme was changed.
Since the introduction of libankihelper and the app automatically
updating as the system theme changes, these issues no longer seem to
exist, and switching between light and dark appears to work consistently.
Pushed into this PR because it addresses the background color issue
mentioned in code review.
Closes#2054
* Allow passing in reference into WithFloating as prop
* Fix WithAutocomplete
* Fix WithFloating for MathjaxOverlay
* Add resize-store
* Allow passing debug=True to jest_test for debugger support (#2013)
* Disable auto-closing of HTML tags
https://forums.ankiweb.net/t/set-html-editor-as-a-default-editor-instead-of-visual-editor/20988/3Closes#1963
* Add slight margin to MathjaxEditor
* Enable passing offset and shift to WithFloating
* Hide overflow of mathjax editor
* Add automatic hide functionality to sveltelib/position
* Last polishes for Surrounder class (#2017)
* Make private properties in Surrounder truly private
* Fix remove logic of Surrounder
* No reason for toggleTriggerRemove to be async
* Allow using alt-shift to set all remove formats but this one
* modifyFormat => updateFormat
* Fix formatting
* Fix field descriptions blocking cursor from being set (#2018)
- happens when focus is in HTML editor
* Remove hiding functionality again until it's really useful
* Add support for autoPlacement
* Implement new WithFloating that supports manually calling position()
* Implement hide mechanisms
* Add option in math dropdown to toggle MathJax rendering (#2014)
* Add option in math dropdown to toggle MathJax rendering
Closes#1942
* Hackily redraw the page when toggling MathJax
* Add Fluent string
* Default input setting in fields dialog (#1987) (kleinerpirat)
* Introduce field setting to use plain text editor by default (kleinerpirat)
* Remove leftover function from #1476
* Use boolean instead of string
* Simplify clear_other_field_duplicates
* Convert plain text key to camelCase
* Move HTML item below the existing checkbox, instead of to the right (dae)
Showing it on the right is more space efficient, but feels a bit
cluttered IMHO.
* Fix not being able to scroll when mouse hovers PlainTextInput (#2019)
* Remove overscroll-behavior: none for * (all elements)
* Revert "Remove overscroll-behavior: none for * (all elements)"
This reverts commit 189358908cecd03027e19d8fe47822735319ec17.
* Use body instead of *, but keep CSS rule
* Unify two CSS rules
* Remove console.logs
* Reposition mathjax menu on switching between inline/block
* Implement WithOverlay
* Implement FloatingArrow
* Display overlay with padding and brighter background
* Rename to MathjaxOverlay
* Simplify MathjaxOverlay component overall
* Rename ImageHandle to image overlay
* Generally fix ImageOverlay again
* Increase z-index of StickyContainer
* Fix setting block or inline on mathjax
* Add reasons in closing-{click,keyup}
* Have both WithFloating and WithOverlay use a simple show flag instead of a store
* Remove subscribe-trigger
* Fix clicking from one mathjax element to another
* Check before executing cleanup
* Do not wait for elements to mount before slotting in With{Floating,Overlay}
* Allow using reference slot for WithFloating and WithOveray
* Add inline argument to options
* Add support for inline slot in WithOvelay
* Use WithFloating for RemoveFormatButton
* Remove last uses of DropdownMenu and WithDropdown
* Remove all of the bootstrap dropdown components
* Fix closing behavior of several buttons and ImageOverlay
* Increase popover padding to 6px
* Find a different way to create some padding at the bottom of the fields
...before the tag editor
@kleinerpirat I think is what this css what trying to achieve?
* Satisfy tests
* Use removeStyleProperties in ImageOverlay
* Use notify function in WithOverlay and WithFloating
* Do not use portal for WithFloating and WithOverlay
Allows for scrolling
* Set hidden to default false in Rich/Plain TextInput
* Reset handle when changing mathjax elements via click
* Restrict size of empty mathjax image
* Prevent sticky labels from obscuring menus
* Remove several overflow-hidden
* Fix empty string being falsy bug when editing mathjax
* Do not import portal anymore
* Use { reason, originalEvent } instead of symbol as update to modified event store
* Fix closing behavior of image overlay (do not close after resize)
* Simplify Collapsible
* Use removeStyleProperties in Collapsible
* Satisfy eslint
* Fix latex shortcuts being mounted
* Fix mathjax overlay not focusable in first field
* Neither hide image overlay on escaped
* Fix Block ButtonDropdown wrapping
* Bring back portal to fix tag editor
* Remove most of the original description placeholder implementation
* Move description showing logic to RichTextInput
- there is no need to propagate it to ContentEditable
* Remove the @html from field-description
This actually worked - however I removed it in case we'd rather offer
markdown support or something else in the future.
* Do not remove placeholder already on focus
- Other editors do not do it either
* Hide via hidden attribute instead of unmounting
* Do not pass content to ContentEditable
* Sort imports
* Change placeholder text color (dae)
In day mode, slightly-grey is almost indistinguishable from black
(at least on the monitor I'm using here)
It appears that a variable bound to the `innerHTML` property of
a contenteditable element is only updated when `input` event fires on
the element, and not when changes are made to the DOM programmatically.
* Move field description into EditingArea as placeholder
* Prevent insertion of breaks into empty fields
to allow :empty CSS selector to also work on fields other than the first one.
* Remove redundant setContext from EditingArea
* Fix import order
* Revert "Prevent insertion of breaks into empty fields"
This reverts commit 1615fd5cf441b1047dae6a34265acb9c5cae50b2.
* Use class:empty instead of :empty CSS pseudo-class
* Restrict description to single line, ellipse overflow
* Make description in field dialog a bit clearer
Re: https://forums.ankiweb.net/t/anki-2-1-53-release-candidate/20122/2
Autoloads in MathJax are asynchronous, and the caller is expected to
use asynchronous APIs when they are in use [1]. The editor uses the synchronous
tex2svg(), which throws a "MathJax retry" error when an autoload package
has not yet loaded. Attempting to use the package before it has loaded
appears to break future invocations as well, so the package fails to work
at all until a new webview is created.
The following HTML will reproduce the issue when added to a single card
in a new profile:
```
<strong>6 </strong>Every combination of <anki-mathjax>\boldsymbol{v}=(1,-2,1)</anki-mathjax> and <anki-mathjax>\boldsymbol{w}=(0,1,-1)</anki-mathjax> has components that add to _____.<br>
```
Ideally we'd switch the MathJax rendering to be asynchronous, but that
didn't work well when I tried it in #1862. For now I've just switched
to the full package, which adds about 130KB to the final minified JS
(2.76MB), and likely slows down editor loading somewhat.
[1] https://github.com/mathjax/MathJax/issues/2557#issuecomment-727655089
* Remove custom config and use tex-chtml-full for editor Mathjax
* Add mathjax package in /ts
* Share mathjax config between tex-svg and tex-chtml
* Use "[+]" in Mathjax config again
* Remove mention of MathJaxReady
* Satisfy eslint
* Add ResizableImage.svelte in ts/editable
* Set image constrained via attributes instead of managed style sheet
* Implement new constrained size method
* Turn WithImageConstrained.svelte into normal ts file
* Introduce removeStyleProperties
Removes "style" attribute if all style properties were cleared
* Avoid --editor-width and use one variable set on container
* Disable shrinking if already smaller than shrunken size
* Add button to restore image to original size
* Don't allow restoring original size if no custom width set
* Bottom-center HandleLabel
* Satisfy svelte-check
* Instead of transforming to {\lt}, transform to <
- In Mathjax editor
- This way you can also use Mathjax convenience shortcuts like <=> in
chemistry mode: \ce{<=>}
* Remove unused translateEntitiesToMathjax() (dae)
https://github.com/ankitects/anki/pull/1818#discussion_r857238310
* Move Trigger into its own file
* Try implement HandlerList
* Implement new input handler and handler-list
* Use new refocus HandlerList in TextColorButton
* Fix TextColorButton on windows
* Move ColorPicker to editor-toolbar
* Change trigger behavior of overwriteSurround
* Fix mathjax-overlay flushCaret
* Insert image via bridgeCommand return value
* Fix invoking color picker with F8
* Have remove format work even when collapsed
* Satisfy formatter
* Insert media via callback resolved from python
* Replace print with web.eval
* Fix python formatting
* remove unused function (dae)
* Clarify some comments
* Don't destructure insertion trigger
* Make superscript and subscript use domlib/surround
* Create new {Text,Highlight}ColorButton
* Use domlib/surround for textcolor
- However there's still a crucial bug, when you're breaking existing
colored span when unsurrounding, their color is not restored
* Add underline format to removeFormats
* Simplify type of ElementMatcher and ElementClearer for end users
* Add some comments for normalize-insertion-ranges
* Split normalize-insertion-ranges into remove-adjacent and remove-within
* Factor out find-remove from unsurround.ts
* Rename merge-mach, simplify remove-within
* Clarify some comments
* Refactor first reduce
* Refactor reduceRight
* Flatten functions in merge-ranges
* Move some functionality to merge-ranges and do not export
* Refactor merge-ranges
* Remove createInitialMergeMatch
* Finish refactoring of merge-ranges
* Refactor merge-ranges to minimal-ranges and add some unit testing
* Move more logic into text-node
* Remove most most of the logic from remove-adjacent
- remove-adjacent is still part of the "merging" logic, as it increases
the scope of the child node ranges
* Add some tests for edge cases
* Merge remove-adjacent logic into minimal-ranges
* Refactor unnecessary list destructuring
* Add some TODOs
* Put removing nodes and adding new nodes into sequence
* Refactor MatchResult to MatchType and return clear from matcher
* Inline surround/helpers
* Shorten name of param
* Add another edge case test
* Add an example where commonAncestorContainer != normalization level
* Fix bug in find-adjacent when find more than one nested nodes
* Allow comments for Along type
* Simplify find-adjacent by removing intermediate and/or curried functions
* Remove extend-adjacent
* Add more tests when find-adjacent finds by descension
* Fix find-adjacent descending into block-level elements
* Add clarifying comment to refusing to descend into block-level elements
* Move shifting logic into find-adjacent
* Rename file matcher to match-type
* Give a first implemention of TreeVertex
* Remove MatchType.ALONG
- findAdjacent now directly modifies the range
* Rename MatchType.MATCH into MatchType.REMOVE
* Implement a version of find-within that utilizies match-tree
* Turn child node range into a class
* Fix bug in new find-adjacent function
* Make all find-adjacent tests test for ranges
* Surrounding within farthestMatchingAncestor when available
* Fix an issue with negligable elements
- also rename "along" elements to "negligable"
* Add two TODOs to SurroundFormat interface
* Have a messy first implementation of the new tree-node algorithm
* Maintain whether formatting nodes are covered or within user selection
* Move covered and insideRange into TreeNode superclass
* Reimplement findAdjacent logic
* Add extension logic
* Add an evaluate method to nodes
* Introduce BlockNode
* Add a first evaluate implementation
* Add left shift and inner shift logic
* Implement SurroundFormatUser
* Allow pass in formatter, ascender and merger from outside
* Fix insideRange and covered switch-up
* Fix MatchNode.prototype.isAscendable
* Fix another switch-up of covered and insideRange...
* Remove a lot of old code
* Have surround functions only return the range
- I still cannot think of a good reason why we should return addedNodes
and removedNodes, except for testing.
* Create formatting-tree directory
* Create build-tree directory + Move find-above up to /domlib
* Remove range-anchors
* Move unsurround logic into no-splitting
* Fix extend-merge
* Fix inner shift being eroneusly returned as left shift
* Fix oversight in SplitRange
* Redefine how ranges are recreated
* Rename covered to insideMatch and put as fourth parameter instead of third
* Keep track of match holes and match leaves
* Rename ChildNodeRange to FlatRange
* Change signature of matcher
* Fix bug in extend-merge
* Improve Match class
* Utilize cache in TextColorButton
* Implement getBaseSurrounder for TextColorButton
* Add matchAncestors field to FormattingNode
* Introduce matchAncestors and getCache
* Do clearing during parsing already
- This way, you know whether elements will be removed before getting to
Formatting nodes
* Make HighlightColorButton use our surround mechanism
* Fix a bug with calling .removeAttribute and .hasAttribute
* Add side button to RemoveFormat button
* Add disabled to remove format side button
* Expose remove formats on RemoveFormat button
* Reinvent editor/surround as Surrounder class
* Fix split-text when working with insert trigger
* Try counteracting the contenteditable's auto surrounding
* Remove matching elements before normalizing
* Rewrite match-type
* Move setting match leaves into build
* Change editing strings
- So that color strings match bold/italic strings better
* Fix border radius of List options menu
* Implement extensions functionality
* Remove some unnecessary code
* Fix split range endOffset
* Type MatchType
* Reformat MatchType + add docs
* Fix domlib/surround/apply
* Satisfy last tests
* Register Surrounder as package
* Clarify some comments
* Correctly implement reformat
* Reformat with inactive eraser formats
* Clear empty spans with RemoveFormatButton
* Fix Super/Subscript button
* Use ftl string for hardcoded tooltip
* Adjust wording
* Make eslint sort our imports
* fix missing deps in eslint rule (dae)
Caught on Linux due to the stricter sandboxing
* Remove exports-last eslint rule (for now?)
* Adjust browserslist settings
- We use ResizeObserver which is not supported in browsers like KaiOS,
Baidu or Android UC
* Raise minimum iOS version 13.4
- It's the first version that supports ResizeObserver
* Apply new eslint rules to sort imports
* Move some AddCards specific code to NoteCreator.svelte
* Add new strings for Toggling the Visual / HTML editor
* Set LabelContainer vertical-align to text-top
- Makes them look more centered
* Remove appendInParentheses helper
* Make all ts/*.html files include only module.js and module.css
* Move any JS from .html to index files
* Remove .html files from ts modules
* Remove Python with Starlark implemenation
* Remove reference to non-existing file
* Remove deck-option.html as well
* fix change-notetype screen (dae)
* Avoid initial call of mirror-dom
* Disable updateFocus from OldEditorAdapter
* fixes IME input duplication bug
* Fix saving of latestLocation for ContentEditable
* Fix IME after calling placeCaretAfterContent
* Export other libraries from domlib/index.ts
* Remove dead code
+ Uncomment code which was mistakenly left commmented
* Move move-nodes logic into domlib
Refactor input-manager
Refactor out FocusTrap from EditingArea
Remove unnecessary selecting of node from surround
Add onInput interface to input-manager
Create MathjaxElement.svelte
- This should contain all the setup necessary for displaying
<anki-mathjax> elements in the rich text input
- Does not contain setup necessary for Mathjax Overlay
Deal with backwards deletion, when caret inside anki-mathjax
Set mathjax elements contenteditable=false
Do not undecorate mathjaxx element on disconnect
- Fixes issues, where Mathjax might undecorate when it is moved into a
different div
Add framed element custom element
Introduce iterateActions to allow global hooks for RichTextInput
Remove some old code
Deal with deletion of frame handles
Make Anki frame and frame handles restore each other
Make FrameElement restore its structure upon modification
Frame and strip off framing from MathjaxElement automatically
Move FrameHandle to separate FrameStart/FrameEnd
Refactor FrameHandle
Set data-frames on FrameElement
Fix logic error connected to FrameElement
Communicate frameHandle move{in,out} to anki-mathjax
Clear selection when blurring ContentEditable
Make sure frame is destroyed when undecorating Mathjax
Use Hairline space instead of zeroWidth
- it has better behavior in the contenteditable when placing the caret
via clicking
Allow detection of block elements with `block` attribute
- This way, anki-mathjax block="true" will make field a
field be recognized to have block content
Make block frame element operater without handles
- Clicking on the left/right side of a block mathjax will insert a br
element to that side
When deleting, remove mathajax-element not just image
Update MathjaxButtons to correctly show block state
SelectAll when moving into inline anki mathjax
Remove CodeMirror autofocus functionality
Move it to Mathjaxeditor directly
Fix getRangeAt throwing error
Update older code to use cross-browser
Fix issue with FrameHandles not being properyly removed
Satisfy formatting
Use === instead of node.isSameNode()
Fix issue of focusTrap not initialized
* Fix after rebasing
* Fix focus not being moved to first field
* Add documentation for input-manager and iterate-actions
* Export logic of ContentEditable to content-editable
* Fix issue with inserting newline right next to inline Mathjax
* Fix reframing issue of Mathjax Svelte component
* Allow for deletion of Inline Mathjax again
* Rename iterate-actions to action-list
* Add copyright header
* Split off frame-handle from frame-element
* Add some comments for framing process
* Add mising return types
* Allow theme change at runtime and add hook
* Save or restore default palette on theme change
* Update aqt widget styles on theme change
* styling fixes
- drop _light_palette, as default_palette serves the same purpose
- save default platform theme, and restore it when switching away
from nightmode
- update macOS light/dark mode on theme switch
- fix unreadable menus on Windows
* update night-mode classes on theme change
This is the easy part - CSS styling that uses standard_css or our
css variables should update automatically. The main remaining issue
is JS code that sets colors based on the theme at the time it's run -
eg the graph code, and the editor.
* switch night mode value on toggle
* expose current theme via a store; switch graphs to use it
https://github.com/ankitects/anki/issues/1471#issuecomment-972402492
* start using currentTheme in editor/components
This fixes basic editing - there are still components that need updating.
* add simple xcodeproj for code completion
* add helper to get currently-active system theme on macOS
* fix setCurrentTheme not being immediately available
* live update tag color
* style().name() doesn't work on Qt5
* automatic theme switching on Windows/Mac
* currentTheme -> pageTheme
* Replace `nightModeKey` with `pageTheme`
Co-authored-by: Damien Elmes <gpg@ankiweb.net>
* Remove unnecessary stopPropagation of mathjax-overlay events
* Use CodeMirror component for MathjaxHandle
* Refactor ResizeObserver code in MathjaxHandle
* Wrap setRange in CodeMirror in try/catch
* Add Mathjax Editor bottom margin
* Add custom Enter and Shift+Enter shortcuts for the MathjaxHandle
* Format
* Move placeCaretAfter to domlib
* Move focus back to field after editing Mathjax
* Put Cursor after Mathjax after accepting
* Add delete button for Mathjax
* Change border color of mathjax menu
* Refactor into MathjaxMenu
* Put caretKeyword in variable
* Use one ResizeObserver for all Mathjax images
* Add minmimum width for Mathjax editor
* is still smaller than minimal window width
* Add bazel directories to .prettierignore and format from root
* exclude ftl/usage (dae)
the json files that live there are output from our tooling, and
formatting them means an extra step each time we want to update them
also exclude .mypy_cache, which is output by scripts/mypy*
* minor ftl tweak: newline -> new line (dae)
* Add utility functions for saving and restoring the caret location
Implement surroundNoSplitting
Clarify surroundNoSplitting comments
Start implementing surroundSplitting and triggerIfSimpleInput
Fix after rebase
Implement findBefore / findAfter in lib/surround
* to merge adjacent nodes into the surrounding nodes
Use new prettier settings with lib/{location,surround}
Fix imports that I missed to rename
Add some tests for find-adjacent
Split find-within from find-adjacent
Normalize nodes after insertion in surroundNoSplitting
Do not deep clone surroundNode
-> no intention of supporting deep nodes, as normalization would be impossible
Add some tests concerning nested surrounding nested nodes
Select surroundedRange after surrounding
Fix ascendWhileSingleInline
A flawed first surround/trigger implementation
Move trigger out of lib/surround
Implement Input Manager as a way to handle bold on empty selection
Switch bold button away from execCommand
Pass in Matcher instead of selector to find-adjacent and surroundNoSplitting
* Also adds a failing test for no-splitting
Refactor find-adjacent
* add failing test when findBefore's nodes have different amounts of
child nodes
Change type signature of find-adjacent methods to more single-concern
Add test for surrounding where adjacent block becomes three Text elements
Make nodes found within surrounded range extend the ranges endOffset
Add base parameter to surroundNoSplitting to stop ascending beyond container
Stop surrounding from bubbling beyond base in merge-match
Make all tests pass
Add some failing tests to point to future development
Add empty elements as constant
Implement a broken version of unsurround
Even split text if it creates zero-length texts
-> they are still valid, despite what Chromium says
Rename {start,end} to {start,end}Container
Add more unit tests with surround after a nested element
Set endOffset after split-off possibly zero length text nodes
Deal with empty elements when surrounding
Only include split off end text if zero length
Use range anchors instead off calcluating surroundedRange from offsets
* this approach allows for removal of base elements when unsurrounding
Comment out test which fail because of jsdom bugs
We'll be able to enable them again after Jest 28
Make the first unsurround tests pass
Add new failing test for unsurround text within tag
Fix unsurround
Test is deactivated until Jest 28
Rewrite input-manager and trigger callback after insertion
Avoid creating zero length text nodes by using insertBefore when appropriate
Implement matches vs keepMatches
Make shadow root and editable element available on component tree
Make WithState work with asynchronous updater functions
Add new Bold/Italic/UnderlineButton using our logic
Add failing test for unsurrounding
* Move surround/ to domlib
* Add jest dependency
* Make find-within return a sum type array rather than two arrays
* Use FoundMatch sum-type for find-above (and find-within)
* Fix issue where elements could be cleared twice
* if they are IN the range.endContainer
* Pass remaining test
* Add another failing test
* Fix empty text nodes being considered for surrounding
* Satisfy svelte check
* Make on more type correct
* Satisfy remaining tests
* Add missing copyright header
* Add utility functions for saving and restoring the caret location
* Implement cross-browser.getSelection
* Save and restore location on ContentEditable
* Fix refocus by clicking on a field that had a non-collapsed selection
* Refactor editor css, fix editor button highlight
- Avoid using webview.css
- Move more buttons css into button_mixins
* Fix DropdownItem appearance
* Fix the visuals of tags
* Make dropdown font slightly smaller
* Give SelectOption a background color
* Move some css from deck-options-base to CardStateCustomizer
* Avoid using core.scss for CardStats
* Avoid using sass/core in congrats package
* Inline core.scss into webview.scss
* Include fusion-vars for base.scss
* need to keep core.scss around for now (dae)
