{ config, pkgs, ... }:

{
  # TODO

  #  # Kernel
  #  # boot.kernelPackages = pkgs.linuxPackages_latest;
  #  # boot.kernelPackages = pkgs.linuxPackages_hardened;
  #
  #  # SSH early boot setup
  #  boot.initrd.network.enable = true;
  #  boot.initrd.network.ssh = {
  #    enable = true;
  #    port = 22;
  #    shell = "/bin/cryptsetup-askpass";
  #    authorizedKeys = [
  #      "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAACAQCpgihAg8Qzu5q+AGXHLR7p+rrS1yB0KlZb/Y/EwZT15EhEtsUMqBMRiY0TdjKQU0broyygZnymccLmCXvihEgk3zk/hP8VEDmN5wmE2tRBPR4lSjo8E1R8N79G+gaFkwi93QYh57MsGfa9k4tvGrJy0yaD7GrPqtQf+IIuvV14WJQAqnikTdbFqRjk5JGearYLU7jSKa+9NmR7JQ9NExoyIPgmQ/pd0Xc2qt8k5UGfz3HM9MAmIVQ30whK6m1iYZ8nxEidHrfreQx8NOa7ujo4zQnV1NYvRUjObr/qyIhPU6DYLT2mVRNupQFKx6LI38O4U13heugUFqJ3zvog3aDsriFiv8jzJAJvWXx7Q3TqKhqiG9VTkwBw1NDbCAOXKiEdMfiCYbdCfpNgdepU75bMloJcSQQVUqoH2tQhSbwKLuRFgOnyaHpvWbieXBRcUnfG8gg4p4jqiwx5laweEeOIOD/i7G1Mjx7Dj2ctnT/ILat/xsf+Y0W4eJr3bc5L9ghgw6wsKbNSqwjFUCFcHcARK3gvSH+hO2/BpgMVoyvZjO5PNuUqfsZ7bIIs5cDdyB/ly3irKuaRz1+3x1x4gPgSiOcji7HxPwogzhPsyfoRLHNt9tJ5X4nF2Iz1M5RTJpbZCi6yEj+9Q85FVjD76BEWuZe18kRrwhuLf/XgKdF9tQ== openpgp:0xA8B75370"
  #    ];
  #    hostKeys = [ "/etc/secrets/initrd/ssh_host_ed25519_key" ];
  #  };
  #  # Find out which module is used for network card:
  #  #   lspci -v | grep -iA8 'network\|ethernet'
  #  # Or check the "Network" part of:
  #  #   inxi -F
  #  #
  ##  boot.initrd.availableKernelModules = [ "r8152" ];
  ##  boot.extraModulePackages = with config.boot.kernelPackages; [
  ##    r8152
  ##  ];
  #  boot.initrd.kernelModules = [
  #    # Arch wiki: Mkinitcpio MODULES: USB 3 hub
  #    "usbhid"
  #    "xhci_hcd"
  #
  #    # Realtek RTL8152/RTL8153 Based USB Ethernet Adapters
  #    "r8152"
  #
  #    #"usbcore"
  #    # MII hardware support library
  #    #"mii"
  #    # USB HID core driver
  #    #"usbhid"
  #  ];
  #  # dmesg -> enp0s20f0u1u2: renamed from eth0
  #  boot.kernelParams = [ "ip=:::::eth0:dhcp" ];
}